Classic
The technological "classic"
The CLASSIC lines by Gottifredi Maffioli are created to deliver the performance of high-tech cordage without compromising the fascinating look of classic ropes. Thanks to its construction and to a careful selection of materials, this lines are incredibly soft and aesthetically attractive, showing the typical fuzzy appearance of natural fibres, but retaining the strength and abrasion resistance properties of innovative high tenacity synthetic yarns.
Very good abrasion and heat resistance, good grip both on winches and in jammers.
- Double Braid
- Core: DSK78 Ultra
- Cover: Technora® + H.T. Polyester
- Recommended for: Sheets, braces, runners, halyards
- Diameters: 6 – 24 mm (larger diameters on demand)
Very high strength, extremely lightweight, very low stretch and reliability.
- Double Braid
- Core: DSK78 Ultra
- Cover: H.T. Polyester
- Recommended for: Control lines, sheets, halyards
- Diameters: 4 – 24 mm (larger diameters on demand)
Very lightweight, very low elongation.
- Double Braid
- Core: Novabraid 78
- Cover: H.T. Polyester
- Recommended for: Halyards, sheets
- Diameters: 6 – 16 mm (larger diameters on demand)
Low strech, good abrasion resistence and good grip.
- Double Braid
- Core: H.T. Polyester
- Cover: H.T. Polyester
- Recommended for: Halyards, sheets
- Diameters: 4 – 24 mm (larger diameters on demand)
Very good abrasion resistance, flexible even after prolonged use.
- Double Braid
- Core: H.T. Polyester
- Cover: H.T. Polyester
- Recommended for: Mooring
- Diameters: 12 – 40 mm (larger diameters on demand)
Extreme softness, very good abrasion resistance.
- Twisted rope
- Core: H.T. Polyester
- Recommended for: Mooring
- Diameters: 8 – 24 mm (standard range)
Useful accessories
D-14 and D-16 scissors
D-14 and D-16 scissors are specially designed for cutting Dyneema fibers. The blades of these scissors are laser cut and have an excellent grinding profile.
Set 4 GM needles
Fid set of n. 4 needles for splicing ropes to mm 4 – 10.
Sailmaker’s sewing needles
Set n. 5 needles (13-19)
D-Splicer set
The D-SPLICER needle is the ultimate solution for splicing thin yachting ropes.The D-Splicer works very well for lines thinner than 5 mm diameter and in any other situation where existing fids do not work.
Swedish fids
Stainless steel with smooth wooden handle. Dimensions: S - M
F-series Needles
The needles are made from stainless steel and have a fixed handle for easy pulling. The needles are available in four different sizes: 1.0 / 1.5 mm / 2.0 mm / 2.5 mm
Sailmaker’s sewing needles assorted tube of 10
Set n. 10 needles (14-18)
Heat knife
Hand helt heat knife including blade – Working voltage: 220 V – Power: 60 W
Palm
Palm ideal for whipping and stitching even the hardest ropes.